Rate this post

Guides.

A vise is an important tool in many woodworking, metalworking, and other manufacturing applications. Bench vises attach directly to a workbench to hold the work during operations such as sawing, planing, and drilling. The way vises work and what materials are used to make them are covered in this article.

bench vise in a mechanical workshop
This bench vise is located in a mechanical workshop.

The image is from ChiccoDodiFC/Shutterstock.

There are woodworking vises.

The bench vise is the most common woodworking vise. It has several components. The jaws are the elements of the vise. A set of jaws, one fixed and one moving parallel to the other, secures the workpiece with a screw mechanism, which moves one jaw in toward the other. Jaws are usually made of wood, plastic, or metal.

If the working surface is stable, a bench vise can be attached directly to the surface or the side. The vise can be attached directly to the top of the surface with a swivel. Lining the jaws with wood or a similar material is a good idea because many bench vises feature metal jaws. Over time, jaws can be replaced. Some bench vises can be used as anvils. Bench vises can be used in a variety of ways. Bench vises are used for industrial operations.

There are heavy-duty bench vises.

Heavy-duty bench vises are often made from iron and are referred to as machinists ‘ vices. The components include a main screw and a slide bar. When the first set of jaws wears out, there will be an additional set of replacement jaws to be installed. A heavy-duty bench vise will either be stationary or have a 180 degree turn. There is a secondary set of steel pipe jaws on bench vises.

The bench vises are medium duty.

Medium-duty bench vises are often made of iron and feature replaceable steel top jaws, as well as pipe jaws. Many have a built-in anvil. Depending on the application, jaw faces can be switched between smooth and serrated sides.

There are pipe vises.

Plumbing uses pipe vises to hold pipes or tubing secure. They are capable of holding pipes as small as 3mm in diameter or as large as 200mm. They can be fitted onto a workbench or a mobile tripod stand. Outside of a workshop, a stand is used for projects. Sometimes two or more are used for long lengths of pipe.

There are chain vises.

A chain is used to secure the pipe. The pipe is held in a V-shaped support by a chain. The chain is made from high-tensile steel. Chain pipe vices can be used with irregularly shaped pipes. In comparison to hinged vices, they have a larger working range and capacity because only the length of the chain limits the working range of the vice. The entire pipe can be gripped securely thanks to the large surface of the chain. The chain pipe vice takes more time than other vises. The chain must be threaded between the jaws of the tool to hold the pipe in place.

There are Yoke Vises.

Yoke vises use a screw to hold the pipe in place. A fixed v-shaped lower jaw and moving upper jaw hold lengths of pipe in place. The jaws are serrated to give you a better grip. The moving jaw is lowered with a screw and pressure exerted on the stationary jaw. The space between the jaws of the vice is adjusted by a tommy-bar. Yoke vices are usually made of cast iron and can be fastened to a workbench or a tripod stand.

There are metalworking vises.

In order to file and cut metal, metalworking vises hold pieces of metal in place instead of wood. Most of the vises are made of cast iron. Some have a cast iron body. Cast iron is a good material to use because of its rigidity, strength, and affordability. The jaws are replaceable because they are a separate piece. Soft jaw covers can be made of aluminum, copper, wood, or plastic. They are bolted onto a workbench, with the jaws jutting out a little over the front edge. Most of the vises have a base with a small anvil on the back of their bodies. We have a guide for more information on engineer ‘s vises.

Summary.

There are different types of vises and how they work. Visit the Thomas Supplier Discovery Platform to locate potential sources of supply or consult our other guides for more information on related products.

Sources.

There is more from machinery, tools and supplies.

Source: https://nhadep247.net
Category: Machine