Rate this post

The lamping equipment for coordinate measuring machines can be fitted with 25mm grid boards.

AllMATIC-Jakob is one of the other products.

AllMATIC-Jakob is one of the other products.

The horizontal installation is suitable for vertical milling machines.

See the other products of Effecto Group S.

See the other products of Effecto Group S.

There is a self-centering vise in the machine table. It ‘s used in custom high-productivity machines.

See the other products.

See the other products.

The workholding device used by HAUBEX is a modified version of the MakroGrip®. The narrow jaw width and slim design of the 5-Axis Vice make it easy to make 5-sided blanks. The maximum is what it is.

Centring vice for flexible applications. Thanks to enclosure, operational reliability is absolute. The high repetition accuracy is zero. The central alignment is variable. The range is user-friendly.

There are replaceable jaws forged steel and monobloc jaws.

It is used to install small objects. It ‘s an accessory of the milling machine and drilling machine. It is fixed on the machine table.

There is a large anvil surface for aligning works.

See the other products.

See the other products.

To meet standards. The innovative fixture is more efficient than any traditional vise or workholding system on the market. The work has 5 surfaces.

See the other products.

See the other products.

The D221M are more efficient than any other vise or work holding system on the market. They reduce costs by speeding up shop through-put.

See the other products.

See the other products.

The innovative fixture provides an exceptional clamping force, with superior efficiency to any other traditional workholding system or vise. This leads to reduced costs and quicker shop through-put.

See the other products.

See the other products.

The base is 0 It is possible to install the vice because of the special jaw design.

See the other products.

See the other products.

The 2-position milling machine vise for holding shafts is used on milling machines. There are two jaws that press the round-shaped object.

See the other products.

See the other products.

The jaws, remachining of the working surfaces connected to the vise is necessary in order to acquire accuracy parameters specified in the techninal documentation.

See the other products.

See the other products.

Machine table embedded with 2 JAWS OSV OSV vices are widely used to cut the work piece. The thrust of the tool.

See the other products.

See the other products.

There is a Precision chuck with low cycle time. It ‘s ideal for simple xture plates and 5th axis trunion xtures.

See the other products.

See the other products.

There is a self-centering vise with a high clamping force. There are vises available.

FORCE can be adapted to any type of vice, from 100 to 200mm, and is the ideal accessory for all types of mechanical, pneumatic or hydraulic vices. Adapts to all vice types.

Multiple vices can be used together for high clout power up to 22.

See the other products.

See the other products.

The TriMax T Series of vises is a complete multi-part system that reduces downtime and maximizes machine tool capacity. The jaws are made to fit up to four pieces at a time.

See the other products.

See the other products.

The TriMax T Series of vises is a complete multi-part system that reduces downtime and maximizes machine tool capacity. The jaws are made to fit up to four pieces at a time.

See the other products.

See the other products.

Unlike traditional vises, the TriMax G has traction clamping. The vise has a fixed jaw and a moving jaw that moves on ground shafts.

See the other products of Spreitzer. “ Przisionswerkzeuge ” is the name of the company.

See the other products of Spreitzer. “ Przisionswerkzeuge ” is the name of the company.

The centre-clamping vise series MZU with step jaws gives the user the highest level of flexibility. Even for short cutting tools, the tiered step jaws offer maximum accessibility.

See the other products of Spreitzer. “ Przisionswerkzeuge ” is the name of the company.

See the other products of Spreitzer. “ Przisionswerkzeuge ” is the name of the company.

When maximum centre and repetition precision are not required, this centre-clamping vise series is used. It is especially designed for unmachined parts on multi- axis.

See the other products of Spreitzer. “ Przisionswerkzeuge ” is the name of the company.

See the other products of Spreitzer. “ Przisionswerkzeuge ” is the name of the company.

The self-centering vise -series MZR is used as a cost-effective clamping tool. It has the maximum access to the multi- axis machining centers.

You can see the other products.

You can see the other products.

To increase the range. The vise ‘s repeatability positioning precision is within 0 and it can achieve 1300KG. The center of the vise can be adjusted.

You can see the other products.

You can see the other products.

To increase the range. The vise ‘s repeatability positioning precision is within 0 and it can achieve 1300KG. The center of the vise can be adjusted.

You can see the other products.

You can see the other products.

Users can array several magnetic vises in one set-up on a working table or a tooling tombstone to custom their own workholding solutions.

Jergens Inc has other products.

Jergens Inc has other products.

The Dovetail Vise Mounts are directly to a table. It reduces the distortion of parts. It requires very little material. It ‘s best to use 060 ” or less.

Jergens Inc has other products.

Jergens Inc has other products.

Mounts directly to a table. It reduces the distortion of parts. It requires very little material. It ‘s best to use 060 ” or less. It is possible to cut a 10o angle in the bottom.

Jergens Inc has other products.

Jergens Inc has other products.

The QLC grid plate system uses clamps. There will be a lot you can throw at this Low Profile vise. There are no tools in the picture for the new 130mm Self Centering Vise.

You can see the other products.

You can see the other products.

STD vises have a small base dimensions, but the extra large base dimensions are much longer. Sometimes the space on the machine table is not large enough to have 2 vises in one.

You can see the other products.

You can see the other products.

The most advanced vise is the StandardFLEX series. Their.

You can see the other products.

You can see the other products.

The perfect mix of price, quality, andVersatility is the most popular vise in the world. The components of all our vises will interchange.

See the other products.

See the other products.

The jaws can be mechanically or mechanically operated.

See the other products.

See the other products.

The jaws are mechanically/hydraulically operated.

See the other products.

See the other products.

AMF manufactured the machine tools vise. It has a hardened 60 Hrc. It has a jaw in a pair.

The pneumatic vice Base element was hardened to 56HRC with 1 pair of gripping jaws.

See the other products.

See the other products.

All guides and the thread can be lubricated quickly and easily Horizontal, vertical or side mounting Vice with two jaws and a stationary center jaw Steel basic body as well.

See the other products.

See the other products.

On request. It is suitable for use on machining centers. It is possible to connect a base plate vertical mounting with a side or horizontal one.

See the other products.

See the other products.

On all common zero-point clamping systems, as well as 5-axis machining centers, there is a Hydraulically actuated centering vice. It can also beOptionally with inductive sensors. There is a 2-jaws version. Customer benefits are Jaw.

You can see the other products.

You can see the other products.

There is force maintenance in closing Self centering up to 38. Centralized lubrication Pressurization has a Stroke control Rating of 530 N.

You can see the other products.

You can see the other products.

There is a fixed jaw force of up to 55,000 N and a stroke control rating of 40 Centralized Pressurization.

You can see the other products.

You can see the other products.

The Self-centering Compact has a stroke control rating of 40. Centralized lubrication pressurization.

The jaw holder is mild steel. The steel is high strength. The body and jaw holder are hardened. There is a note for ordering with a crank handle. The jaw plates should be ordered separately. It is noted that it is mechanically.

See the other products.

See the other products.

The KSM2 multi clamping vise has a jw quick- change system. There is a field of application.

See the other products.

See the other products.

There are single-acting vises that are suitable for palletizing systems. They can be adapted to new due to the modular system and the VERO-S interface.

See the other products.

See the other products.

It is possible to load several objects on tombstones with the use of a double clamping vise with third hand function. There is a field of application.

The jaws move toward the center. This always provides stable centering settings. It ‘s ideal for 5-axismachining. Serrated jaws are two choices of jaw style.

See the other products.

See the other products.

The low profile vise has a toggle mechanism. Jaw Stroke ( mm ) : 204 Jaw Width ( mm ) : 125 Hardened and ground steel body construction for high accuracy. Kitagawa ‘s has key features.

See the other products.

See the other products.

Small drilling / tapping machine has a compact power vise. 100 Hardened and ground steel body construction for high accuracy is what Jaw Stroke ( mm ) : 204 Jaw Width ( mm ) : Kitagawa has a series of vises.

See the other products.

See the other products.

Small drilling / tapping machine has a compact power vise. 100 Hardened and ground steel body construction for high accuracy is what Jaw Stroke ( mm ) : 128 Jaw Width ( mm ) : Kitagawa has a series of vises.

If product. If product Is it hasVideo ?

Each product. The value is # i! The data is called specData. Length-1 ) /end /each

There is a product. There is a product price. If the product is formatted. There is a product price. “ PRICE_RANGE ” is the price type. There is a product price. If it ‘s formattedPriceMax

If product. If product Is it hasVideo ?

Each product. The value is # i! The data is called specData. Length-1 ) /end /each

There is a product. There is a product price. If the product is formatted. There is a product price. “ PRICE_RANGE ” is the price type. There is a product price. If it ‘s formattedPriceMax

Not specified.

Not specified.

Your answer has been taken into account. Thanks for your help.

You have suggestions for improvement.

Evaluate the search results.

Tell us what you think.

You can subscribe to our newsletter.

Thank you for taking the time to subscribe.

There was a problem with your request.

Invalid email address

Receive updates on this section every two weeks.

DirectIndustry processes your personal data, so please refer to our Privacy Policy for more information.

Source: https://nhadep247.net
Category: Machine